For full scale deflection of total $50$ divisions, $50 \, mV$ voltage is required in a galvanometer. The resistance of the galvanometer, if its current sensitivity is $2 \, div/mA$, will be $..... \Omega$.

The pointer of a dead-beat galvanometer gives a steady deflection because

$A$ galvanometer gives full scale deflection with $0.006 \ A$ current. By connecting it to a $4990 \ \Omega$ resistance,it can be converted into a voltmeter of range $0-30 \ V$. If connected to a $\frac{2n}{249} \ \Omega$ resistance,it becomes an ammeter of range $0-1.5 \ A$. The value of $n$ is:

When a $12\,\Omega$ resistor is connected in parallel with a moving coil galvanometer,its deflection reduces from $50$ divisions to $10$ divisions. The resistance of the galvanometer is ............. $\Omega$.

The scale of a galvanometer is divided into $160$ equal divisions. The galvanometer shows full scale deflection of $16$ mA and maximum voltage is $80$ mV. Now the range is changed so that the galvanometer reads $160$ $V$. The required resistance to be connected is

$A$ voltmeter having a resistance of $50 \times 10^3 \, \Omega$ is used to measure the voltage in a circuit. To increase the range of measurement $3$ times,the additional series resistance required is: