If $x$ longitudinal strain is produced in a wire of Young's modulus $y,$ then energy stored in the material of the wire per unit volume is

$A$ wire of Young's modulus $1.6 \times 10^{12} \,N/m^{2}$ is stretched by a force so as to produce a strain of $2 \times 10^{-4}$. The energy density of the wire is

$A$ rubber band catapult has an initial length of $2 \, cm$ and a cross-sectional area of $5 \, mm^2$. It is stretched by an additional $2 \, cm$ and then released to project a stone of mass $20 \, g$. The velocity of the projected stone is (Young's modulus of rubber $= 5 \times 10^8 \, N/m^2$) (in $ \, m/s$)

Two wires of the same material (Young's modulus $Y$) and same length $L$ but radii $R$ and $2R$ respectively are joined end to end and a weight $W$ is suspended from the combination as shown in the figure. The elastic potential energy in the system is

When the load applied to a wire is increased from $5 \ kg$ wt to $8 \ kg$ wt,the elongation of the wire increases from $1 \ mm$ to $1.8 \ mm$. The work done during the elongation of the wire is (Acceleration due to gravity $= 10 \ m/s^2$)

$A$ wire of length $25 \ cm$ and radius $2 \ mm$ is fixed at one end. If a torque is applied at the other end to produce an angular displacement of $45^o$,calculate the work done in $J$. (Given: $\eta = 8 \times 10^{10} \ N/m^2$)