If the length of the filament of a heater is | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The power $P$ of a heater is given by $P = \frac{V^2}{R}$,where $V$ is the voltage and $R$ is the resistance.Since $V$ is constant,$P \propto \fra

Vedclass · Accepted Answer

Increase by about $11\%$

Vedclass · Answer

(B) The power $P$ of a heater is given by $P = \frac{V^2}{R}$,where $V$ is the voltage and $R$ is the resistance.Since $V$ is constant,$P \propto \frac{1}{R}$.The resistance $R$ of a wire is given by $R = ho \frac{l}{A}$,so $R \propto l$.Therefore,$P \propto \frac{1}{l}$.Let the initial length be $l_1 = 100$ and the final length be $l_2 = 100 - 10 = 90$.Using the proportionality $P_1 l_1 = P_2 l_2$,we get:$P_2 = P_1 	imes \frac{l_1}{l_2} = P_1 	imes \frac{100}{90} = P_1 	imes 1.111$.The percentage change in power is $\frac{P_2 - P_1}{P_1} 	imes 100 = (1.111 - 1) 	imes 100 = 11.1\%$.Thus,the power increases by about $11\%$.

If the length of the filament of a heater is reduced by $10\%$,the power of the heater will

Similar Questions

$Kilowatt-hour$ $(kWh)$ is a unit of

Explain electrical energy and power.

How many units are consumed if a $100\,W$ electric bulb is kept $ON$ for $10$ hours?

From where does electrical power derive? Explain it.

If the current in an electric bulb is changed by $1\%$,then the percentage change in power will be ............. $\%$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module