In a metre bridge experiment, the balance point is obtained if the gaps are closed by $2 \text{ } \Omega$ and $3 \text{ } \Omega$. $A$ shunt of $X \text{ } \Omega$ is added to $3 \text{ } \Omega$ resistor to shift the balancing point by $22.5 \text{ cm}$. The value of $X$ is

$STATEMENT-1$: In a Meter Bridge experiment,a null point for an unknown resistance is measured. Now,the unknown resistance is placed inside an enclosure maintained at a higher temperature. The null point can be obtained at the same point as before by decreasing the value of the standard resistance.
$STATEMENT-2$: The resistance of a metal increases with an increase in temperature.

In a meter bridge,the null point is found at a distance of $25\, cm$ from $A$. If now a resistance of $10\,\Omega$ is connected in parallel with $S$,the null point occurs at the midpoint of $AB$. The value of $R$ is ................. $\Omega$. (in $.67$)

In the meter bridge experiment,for given values of $R_1$ and $R_2$,the balance point is $20 \ cm$ from point $A$. When $R_2$ is shunted by a $20 \ \Omega$ resistance,the balancing point shifts to $50 \ cm$ from point $A$. Find the value of $R_2$ in $\Omega$.

In the meter bridge shown,the resistance $X$ has a negative temperature coefficient of resistance. Neglecting the variation in other resistors,when current is passed for some time in the circuit,the balance point should shift towards:

In a metre bridge experiment (see figure), the positions of the cell, $E$, and galvanometer, $G$, are interchanged. We shall observe in the galvanometer: