In a screw gauge,$5$ complete rotations of the circular scale give a $1.5 \, mm$ reading on the linear scale. The circular scale has $50$ divisions. The least count of the screw gauge is: (in $, mm$)

In a screw gauge, the zero of the main scale reference line coincides with the fifth division of the circular scale when two studs are in contact. There are $100$ divisions on the circular scale and the pitch of the screw gauge is $0.1 \text{ mm}$. When the diameter of a sphere is measured, the reading of the main scale is $5 \text{ mm}$ and the $50^{th}$ division of the circular scale coincides with the reference line of the main scale. The diameter of the sphere is . . . . . . $\text{mm}$.

Two full turns of the circular scale of a screw gauge cover a distance of $1 \ mm$ on its main scale. The total number of divisions on the circular scale is $50$. The screw gauge has a zero error of $-0.03 \ mm$. While measuring the diameter of a thin wire,a student notes the main scale reading of $3 \ mm$ and the $35^{\text{th}}$ division of the circular scale coincides with the reference line of the main scale. The diameter of the wire is: (in $mm$)

$A$ travelling microscope is used to determine the refractive index of a glass slab. If $40$ divisions are there in $1 \; cm$ on the main scale and $50$ Vernier scale divisions are equal to $49$ main scale divisions,then the least count of the travelling microscope is $\dots \times 10^{-6} \; m$.

One main scale division of a vernier caliper is equal to $m$ units. If $n^{\text{th}}$ division of the main scale coincides with $(n+1)^{\text{th}}$ division of the vernier scale,the least count of the vernier caliper is:

The least count of a screw gauge is $0.01 \ mm$. If the pitch is increased by $75\%$ and the number of divisions on the circular scale is reduced by $50\%$,the new least count will be . . . . . . $\times 10^{-3} \ mm$.