In a vernier callipers, $50$ vernier scale divisions are equal to $48$ main scale divisions. If one main scale division $= 0.05 \ mm$, then the least count of the vernier callipers is . . . . . . $mm$.

$A$ screw gauge has a least count of $0.01\, mm$ and there are $50$ divisions on its circular scale. The pitch of the screw gauge is $........\, mm$.

The one division of main scale of vernier callipers reads $1\,mm$ and $10$ divisions of Vernier scale is equal to the $9$ divisions on main scale. When the two jaws of the instrument touch each other the $zero$ of the Vernier lies to the right of $zero$ of the main scale and its fourth division coincides with a main scale division. When a spherical bob is tightly placed between the two jaws,the $zero$ of the Vernier scale lies in between $4.1\,cm$ and $4.2\,cm$ and $6^{\text{th}}$ Vernier division coincides with a main scale division. The diameter of the bob will be $.............10^{-2}\,cm$

If in a Vernier callipers $10 \,VSD$ coincides with $8 \,MSD$,then the least count of the Vernier calliper is ............ $m$ [given $1 \,MSD = 1 \,mm$].

$A$ spectrometer gives the following reading when used to measure the angle of a prism.
Main scale reading : $58.5^{\circ}$
Vernier scale reading : $09$ divisions
Given that $1$ division on the main scale corresponds to $0.5^{\circ}$. The total number of divisions on the Vernier scale is $30$,which matches $29$ divisions of the main scale. The angle of the prism from the above data is ....... . (in $^{\circ}$)

In a Vernier calipers, when both jaws touch each other, the zero of the Vernier scale is shifted to the right of the zero of the main scale and the $7^{th}$ Vernier division coincides with a main scale division. If the value of $1$ main scale division is $1 \text{ mm}$ and there are $10$ Vernier scale divisions, then the Vernier caliper has