In an experiment,the angles are required to be measured using an instrument where $29$ divisions of the main scale exactly coincide with $30$ divisions of the vernier scale. If the smallest division of the main scale is half a degree $(= 0.5^\circ)$,then the least count of the instrument is:

In an experiment to find out the diameter of a wire using a screw gauge,the following observations were noted:
$(A)$ Screw moves $0.5 \ mm$ on the main scale in one complete rotation.
$(B)$ Total divisions on the circular scale $= 50$.
$(C)$ Main scale reading is $2.5 \ mm$.
$(D)$ $45^{\text{th}}$ division of the circular scale is in the reference line.
$(E)$ Instrument has $0.03 \ mm$ negative zero error.
Then the diameter of the wire is: (in $mm$)

$A$ vernier callipers has $20$ divisions on the vernier scale, which coincide with $19$ divisions on the main scale. The least count of the instrument is $0.1 \,mm$. One main scale division is equal to $...$ $mm$.

The smallest division on the main scale of a vernier callipers is $1 \ mm$,and $10$ vernier divisions coincide with $9$ main scale divisions. While measuring the diameter of a sphere,the zero mark of the vernier scale lies between $2.0 \ cm$ and $2.1 \ cm$ of the main scale,and the fifth division of the vernier scale coincides with a main scale division. The diameter of the sphere is:

The pitch of a screw gauge is $0.5 \ mm$ and there are $100$ divisions on its circular scale. The instrument reads $+2$ divisions on the circular scale when nothing is placed between its jaws. In measuring the diameter of a wire,there are $8$ divisions on the main scale and the $83^{rd}$ division of the circular scale coincides with the reference line. Then the diameter of the wire is (in $mm$)

The length of a cylinder measured by a Vernier caliper is given by the following observations: $3.29 \, cm, 3.28 \, cm, 3.29 \, cm, 3.31 \, cm, 3.28 \, cm, 3.27 \, cm, 3.29 \, cm, 3.30 \, cm$. The most accurate length of the cylinder is ........ $cm$.