One end of a rod of length L is on a horizont | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) We use the principle of conservation of mechanical energy.Let the mass of the rod be $m$.The initial potential energy of the rod is determined by

Vedclass · Accepted Answer

$\sqrt{\frac{3g \sin \alpha}{L}}$

Vedclass · Answer

(A) We use the principle of conservation of mechanical energy.Let the mass of the rod be $m$.The initial potential energy of the rod is determined by the height of its center of mass from the horizontal plane.The center of mass of the rod is at a distance $L/2$ from the end on the plane.Initial height $h = \frac{L}{2} \sin \alpha$.Initial potential energy $U_i = mgh = mg \frac{L}{2} \sin \alpha$.When the rod hits the horizontal plane,its potential energy is zero $(U_f = 0)$.The entire potential energy is converted into rotational kinetic energy about the end fixed on the plane.Rotational kinetic energy $K_f = \frac{1}{2} I \omega^2$,where $I$ is the moment of inertia of the rod about one of its ends,$I = \frac{mL^2}{3}$.By conservation of energy,$U_i = K_f$.$mg \frac{L}{2} \sin \alpha = \frac{1}{2} \left( \frac{mL^2}{3} \right) \omega^2$.$mg \frac{L}{2} \sin \alpha = \frac{mL^2}{6} \omega^2$.Solving for $\omega$:$\omega^2 = \frac{6mgL \sin \alpha}{2mL^2} = \frac{3g \sin \alpha}{L}$.$\omega = \sqrt{\frac{3g \sin \alpha}{L}}$.

One end of a rod of length $L$ is on a horizontal plane. It is inclined at an angle $\alpha$ to the horizontal plane. When released,its angular velocity after coming to the horizontal plane is:

Similar Questions

$A$ tube of length $L$ is filled completely with an incompressible liquid of mass $M$ and closed at both the ends. The tube is then rotated in a horizontal plane about one of its ends with a uniform angular velocity $\omega$. The force exerted by the liquid at the other end is

Why do we not apply force on all the particles of a door to open or close it?

$A$ homogeneous solid cylindrical roller of radius $R$ and mass $M$ is pulled on a cricket pitch by a horizontal force $F$ applied at its center. Assuming rolling without slipping,the angular acceleration of the cylinder is

Two blocks of mass $1\ kg$ and $2\ kg$ are connected with each other by a spring of spring constant $60\ N/m$. If the velocity given to the block of mass $2\ kg$ at the natural length is $6\ m/s$,find the maximum velocity of the $1\ kg$ block in the subsequent motion (in $m/s$).

For the given figure,find the acceleration of the $1\, kg$ block. The string is massless,the mass of the pulley is $M = 2\, kg$,and the diameter of the pulley is $0.2\, m$. (in $m/s^2$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module