$A$ pendulum made of a uniform wire of cross-sectional area $A$ has a time period $T$. When an additional mass $M$ is added to its bob,the time period changes to $T_M$. If the Young's modulus of the material of the wire is $Y$,then $\frac{1}{Y}$ is equal to ($g$ = gravitational acceleration).

$A$ wire of length $2\, m$ is made from $10\, cm^3$ of copper. $A$ force $F$ is applied so that its length increases by $2\, mm$. Another wire of length $8\, m$ is made from the same volume of copper. If the same force $F$ is applied to it,its length will increase by ......... $cm$.

Two wires each of radius $0.2\,cm$ and negligible mass, one made of steel and the other made of brass, are loaded as shown in the figure. The elongation of the steel wire is $.........\times 10^{-6}\,m$. [Young's modulus for steel $= 2 \times 10^{11}\,N/m^2$ and $g = 10\,m/s^2$]

$A$ steel rail of length $5\,m$ and area of cross-section $40\,cm^2$ is prevented from expanding along its length while the temperature rises by $10\,^{\circ}C$. If the coefficient of linear expansion and Young's modulus of steel are $1.2\times10^{-5}\,K^{-1}$ and $2\times10^{11}\,N/m^2$ respectively,the force developed in the rail is approximately:

Wires $A$ and $B$ are connected with blocks $P$ and $Q$ as shown. The ratio of lengths,radii,and Young's modulus of wires $A$ and $B$ are $r, 2r$,and $3r$ respectively ($r$ is a constant). Find the mass of block $P$ if the ratio of the increase in their corresponding lengths is $1/(6r^2)$. The mass of block $Q$ is $3M$.

$(a)$ $A$ steel wire of mass $\mu$ per unit length with a circular cross-section has a radius of $0.1\,cm$. The wire is of length $10\,m$ when measured lying horizontal and hangs from a hook on the wall. $A$ mass of $25\,kg$ is hung from the free end of the wire. Assuming the wire to be uniform and lateral strains $\ll$ longitudinal strains,find the extension in the length of the wire. The density of steel is $7860\,kg/m^3$ and Young's modulus $Y = 2 \times 10^{11}\,N/m^2$.
$(b)$ If the yield strength of steel is $2.5 \times 10^8\,N/m^2$,what is the maximum weight that can be hung at the lower end of the wire?