Four identical conducting rods are joined as shown in the figure. Points $A$ and $D$ are maintained at temperatures of $200^{\circ}C$ and $20^{\circ}C$ respectively. The temperature of junction $B$ will be ....... $^{\circ}C$.

$A$ ring consisting of two parts $ADB$ and $ACB$ of same conductivity $k$ carries an amount of heat $H$. The $ADB$ part is now replaced with another metal keeping the temperatures $T_1$ and $T_2$ constant. The heat carried increases to $2H$. What should be the conductivity of the new $ADB$ part? Given $\frac{l_{ACB}}{l_{ADB}} = 3$.

$A$ wall consists of two layers $A$ and $B$ of equal thickness. Their thermal resistances are $R_1$ and $R_2$. Find the temperature of the interface.

The ratio of thermal conductivity of two rods $A$ and $B$ with the same area of cross-section is $3: 2$. If the thermal resistance of two rods is the same,then the ratio of length of rod $A$ to length of rod $B$ is

The temperatures of the two outer surfaces of a composite slab are $T_2$ and $T_1$ $(T_2 > T_1)$. The thermal conductivities of the materials are $K$ and $2K$,and their thicknesses are $x$ and $4x$,respectively. In the steady state,the rate of heat flow through the slab is given by $f \left( \frac{A(T_2 - T_1)K}{x} \right)$. Find the value of $f$.

Two identical square rods of metal are welded end to end as shown in figure $(i)$,$20 \text{ calories}$ of heat flows through them in $4 \text{ minutes}$. If the rods are welded as shown in figure $(ii)$,the same amount of heat will flow through the rods in ....... $\text{min}$.