The adjoining figure shows two different arra | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) According to Faraday's law of induction,the induced electromotive force $(EMF)$ is given by $\varepsilon = -\frac{d\phi}{dt}$,where $\phi = B \cdo

Vedclass · Accepted Answer

$I_1 > I_2$

Vedclass · Answer

(B) According to Faraday's law of induction,the induced electromotive force $(EMF)$ is given by $\varepsilon = -\frac{d\phi}{dt}$,where $\phi = B \cdot A$ is the magnetic flux.Since the magnetic field $B$ is uniform and decreasing at a constant rate,the rate of change of flux is $\frac{d\phi}{dt} = A \frac{dB}{dt}$.The induced current is $I = \frac{\varepsilon}{R} = \frac{A}{R} \left| \frac{dB}{dt} \right|$,where $R$ is the resistance of the wire frame.In case $I$,the total area enclosed by the loop is $A_1 = L^2 + l^2$. The total length of the wire is $P_1 = 4L + 4l$,so the resistance is $R_1 = \rho \frac{P_1}{a} = \rho \frac{4(L+l)}{a}$ (where $\rho$ is resistivity and $a$ is cross-sectional area).In case $II$,the total area enclosed by the loop is $A_2 = L^2 - l^2$. The total length of the wire is $P_2 = 4L + 4l$,so the resistance is $R_2 = \rho \frac{4(L+l)}{a} = R_1$.Since $A_1 > A_2$ and $R_1 = R_2$,it follows that $I_1 = \frac{A_1}{R_1} |\frac{dB}{dt}| > I_2 = \frac{A_2}{R_2} |\frac{dB}{dt}|$.Therefore,$I_1 > I_2$.

The adjoining figure shows two different arrangements in which two square wire frames are placed in a uniform constantly decreasing magnetic field $B.$ If $I_1$ and $I_2$ are the magnitudes of induced current in the cases $I$ and $II$,respectively,then

Similar Questions

The current $i$ in an inductance coil varies with time $t$ according to the following graph. Which one of the following plots shows the variations of voltage $V$ in the coil?

$A$ square loop of side $5 \, cm$ enters a magnetic field with a velocity of $1 \, cm/s$. The front edge enters the magnetic field at $t = 0$. Which graph best depicts the induced electromotive force $(emf)$ versus time?

$A$ coil and a bulb are connected in series with a $DC$ source. $A$ soft iron core is then inserted into the coil. What happens to the intensity of the bulb?

$A$ conducting wire frame is placed in a magnetic field which is directed into the paper. The magnetic field is increasing at a constant rate. The directions of induced currents in wires $AB$ and $CD$ are

$A$ magnet $NS$ is suspended from a spring and while it oscillates,the magnet moves in and out of the coil $C$. The coil is connected to a galvanometer $G$. Then as the magnet oscillates,

Vedclass Test Series

Exam Paper Generator

Online Exam Module