The bulk modulus of copper is 1.4 times 10^{1 | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The bulk modulus $B$ is defined as $B = \frac{P}{\Delta V / V}$,where $P$ is the hydrostatic pressure.To prevent expansion,the thermal strain must

Vedclass · Accepted Answer

$7.1 	imes 10^7 \ Pa$

Vedclass · Answer

(B) The bulk modulus $B$ is defined as $B = \frac{P}{\Delta V / V}$,where $P$ is the hydrostatic pressure.To prevent expansion,the thermal strain must be balanced by the compressive strain.The thermal expansion of volume is given by $\Delta V = V \cdot 3\alpha \cdot \Delta T$,where $\alpha$ is the coefficient of linear expansion.Thus,the volumetric strain is $\frac{\Delta V}{V} = 3\alpha \Delta T$.Substituting this into the bulk modulus formula: $B = \frac{P}{3\alpha \Delta T}$.Rearranging for pressure $P$: $P = 3 B \alpha \Delta T$.Given values: $B = 1.4 	imes 10^{11} \ Pa$,$\alpha = 1.7 	imes 10^{-5} (^{\circ}C)^{-1}$,and $\Delta T = 30^{\circ}C - 20^{\circ}C = 10^{\circ}C$.Calculating $P$: $P = 3 	imes (1.4 	imes 10^{11}) 	imes (1.7 	imes 10^{-5}) 	imes 10 = 7.14 	imes 10^7 \ Pa \approx 7.1 	imes 10^7 \ Pa$.

The bulk modulus of copper is $1.4 \times 10^{11} \ Pa$ and the coefficient of linear expansion is $1.7 \times 10^{-5} (^{\circ}C)^{-1}$. What hydrostatic pressure is necessary to prevent a copper block from expanding when its temperature is increased from $20^{\circ}C$ to $30^{\circ}C$?

Similar Questions

Explain Shear Modulus and Bulk Modulus.

$A$ copper solid cube of $60\, mm$ side is subjected to a pressure of $2.5 \times 10^7\, Pa$. If the bulk modulus of copper is $1.25 \times 10^{11}\, N/m^2$,the change in the volume of the cube is:

The normal density of a material is $\rho$ and its bulk modulus of elasticity is $K$. The magnitude of increase in density of the material,when a pressure $P$ is applied uniformly on all sides,will be

Determine the volume contraction of a solid copper cube,$10 \; cm$ on an edge,when subjected to a hydraulic pressure of $7.0 \times 10^{6} \; Pa$.

To what depth must a rubber ball be taken in deep sea so that its volume is decreased by $0.1\,\%$. (The bulk modulus of rubber is $9.8 \times 10^8 \, N/m^2$ and the density of sea water is $10^3 \, kg/m^3$.) (in $, m$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module