The maximum elongation of a steel wire of $1 \,m$ length if the elastic limit of steel and its Young's modulus,respectively,are $8 \times 10^8 \,N \,m^{-2}$ and $2 \times 10^{11} \,N \,m^{-2}$,is: (in $\,mm$)

$A$ wire of area of cross-section $10^{-6} \ m^2$ is increased in length by $0.1 \%$. The tension produced is $1000 \ N$. The Young's modulus of the wire is:

When a weight is suspended from the end of an elastic spring,its increased length depends upon what?

Two wires $A$ and $B$ are of the same material. Their lengths are in the ratio $1: 2$ and diameters are in the ratio $2: 1$. When stretched by forces $F_{A}$ and $F_{B}$ respectively,they get equal increase in their lengths. Then the ratio $F_{A} / F_{B}$ is

Young's modulus of a material has the same units as

$A$ steel rod has a radius of $10 \,mm$ and a length of $1.0 \,m$. $A$ force stretches it along its length and produces a strain of $0.32 \%$. The Young's modulus of the steel is $2.0 \times 10^{11} \,N/m^2$. What is the magnitude of the force stretching the rod in $kN$?