The speed of a transverse wave passing through a string of length $50 \; cm$ and mass $10 \; g$ is $60 \; ms^{-1}$. The area of cross-section of the wire is $2.0 \; mm^2$ and its Young's modulus is $1.2 \times 10^{11} \; Nm^{-2}$. The extension of the wire over its natural length due to its tension will be $x \times 10^{-5} \; m$. The value of $x$ is $...$

Young's modulus of rubber is $10^4 \ N/m^2$ and the area of cross-section is $2 \ cm^2$. If a force of $2 \times 10^5 \ dynes$ is applied along its length,then its initial length $L$ becomes:

There are two wires of the same material and same length. The diameter of the second wire is two times the diameter of the first wire. What is the ratio of the extensions produced in the wires by applying the same load?

$A$ brass wire $1.8\; m$ long at $27\;^{\circ}C$ is held taut with little tension between two rigid supports. If the wire is cooled to a temperature of $-39\;^{\circ}C$,what is the tension developed in the wire,if its diameter is $2.0\; mm$? (Coefficient of linear expansion of brass $\alpha = 2.0 \times 10^{-5}\; K^{-1}$; Young's modulus of brass $Y = 0.91 \times 10^{11}\; Pa$)

$A$ $5\, m$ long aluminium wire $(Y = 7 \times 10^{10}\, N/m^2)$ of diameter $3\, mm$ supports a $40\, kg$ mass. In order to have the same elongation in a copper wire $(Y = 12 \times 10^{10}\, N/m^2)$ of the same length under the same weight,the diameter should now be,in $mm$.

Two exactly similar wires of steel and copper are stretched by equal forces. If the difference in their elongations is $0.5 \ cm$,find the elongation $(l)$ of each wire. Given: ${Y_s} = 2.0 \times {10^{11}} \ N/m^2$ and ${Y_c} = 1.2 \times {10^{11}} \ N/m^2$.