The vernier scale used for measurement has a positive zero error of $0.2\, mm$. If while taking a measurement it was noted that the '$0$' on the vernier scale lies between $8.5\, cm$ and $8.6\, cm$ and the vernier coincidence is $6$,then the correct value of measurement is ............. $cm$. (Least count $= 0.01\, cm$)

$A$ plano-convex lens of unknown material and unknown focal length is given. With the help of a Spherometer,we can measure the,

Student $A$ and Student $B$ used two screw gauges of equal pitch and $100$ equal circular divisions to measure the radius of a given wire. The actual value of the radius of the wire is $0.322 \, \text{cm}$. The absolute value of the difference between the final circular scale readings observed by the students $A$ and $B$ is .... .
Given pitch $= 0.1 \, \text{cm}$.

$A$ screw gauge has a pitch of $1.5\; mm$ and there is no zero error. The linear scale has markings at $MSD = 1\; mm$ and there are $100$ equal divisions on the circular scale. When the diameter of a sphere is measured with this instrument,the $2\; mm$ mark is visible on the linear scale,but the $3\; mm$ mark is not visible. The $76^{th}$ division of the circular scale is in line with the linear scale. What is the diameter of the sphere in $mm$?

$A$ steel wire of diameter $0.5 \text{ mm}$ and Young's modulus $2 \times 10^{11} \text{ N m}^{-2}$ carries a load of mass $M$. The length of the wire with the load is $1.0 \text{ m}$. $A$ vernier scale with $10$ divisions is attached to the end of this wire. Next to the steel wire is a reference wire to which a main scale,of least count $1.0 \text{ mm}$,is attached. The $10$ divisions of the vernier scale correspond to $9$ divisions of the main scale. Initially,the zero of vernier scale coincides with the zero of main scale. If the load on the steel wire is increased by $1.2 \text{ kg}$,the vernier scale division which coincides with a main scale division is. . . . Take $g = 10 \text{ m s}^{-2}$ and $\pi = 3.2$.

In an experiment with Vernier callipers of least count $0.1\,mm$,when two jaws are joined together,the zero of the Vernier scale lies to the right of the zero of the main scale and the $6^{th}$ division of the Vernier scale coincides with a main scale division. While measuring the diameter of a spherical bob,the zero of the Vernier scale lies between $3.2\,cm$ and $3.3\,cm$ marks,and the $4^{th}$ division of the Vernier scale coincides with a main scale division. The diameter of the bob is measured as $.......\,cm$.