To paint the side of a building,a painter nor | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) Let $T$ be the tension in rope $A$. The painter pulls rope $A$ downwards with force $T$,and the rope pulls the painter upwards with force $T$. The

Vedclass · Accepted Answer

Both $(A)$ and $(C)$.

Vedclass · Answer

(D) Let $T$ be the tension in rope $A$. The painter pulls rope $A$ downwards with force $T$,and the rope pulls the painter upwards with force $T$. The platform is also supported by the other end of rope $A$,which exerts an upward force $T$ on the platform. Thus,the total upward force on the system (painter + platform) is $2T$.The rope $B$ supports the pulley,so the tension in rope $B$ is $T_B = 2T$. Given that the maximum tension rope $B$ can withstand is $300 \, N$,we have $2T_{\max} = 300 \, N$,which implies $T_{\max} = 150 \, N$.$(i)$ For maximum upward acceleration $a_{\max}$:Using Newton's Second Law for the system: $2T_{\max} - mg = m a_{\max}$.Given $mg = 200 \, N$,so $m = \frac{200}{g} \approx 20 \, kg$ (taking $g = 10 \, m/s^2$).$300 - 200 = 20 a_{\max} \implies 100 = 20 a_{\max} \implies a_{\max} = 5 \, m/s^2$. Thus,$(A)$ is correct.$(ii)$ When the painter is at rest,the system is in equilibrium:$2T = mg = 200 \, N \implies T = 100 \, N$. Thus,$(C)$ is correct.Since both $(A)$ and $(C)$ are correct,the correct option is $(D)$.

To paint the side of a building,a painter normally hoists himself up by pulling on the rope $A$ as shown in the figure. The painter and platform together weigh $200 \, N$. The rope $B$ can withstand a maximum tension of $300 \, N$. Then:

Similar Questions

At what value of $m_1$ will the $8\, kg$ mass be at rest?

Two blocks of masses $m$ and $2m$ are connected by a metal wire of negligible mass and having cross-sectional area $A$,passing over a smooth fixed pulley as shown in the figure. If the masses are released from rest,then the stress produced in the wire is:

Two bodies of mass $3\, kg$ and $4\, kg$ are suspended at the ends of a massless string passing over a frictionless pulley. The acceleration of the system is ........ $m/s^2$ $(g = 9.8\, m/s^2)$.

Two masses $M_1$ and $M_2$ are accelerated uniformly on a frictionless surface as shown in the figure. The ratio of the tensions $T_1/T_2$ is:

Two masses $M$ and $M/2$ are joined together by means of a light inextensible string passing over a frictionless pulley as shown in the figure. When the bigger mass is released,the smaller one will ascend with an acceleration of

Vedclass Test Series

Exam Paper Generator

Online Exam Module