Two full turns of the circular scale of a screw gauge cover a distance of $1 \ mm$ on its main scale. The total number of divisions on the circular scale is $50$. Further,it is found that the screw gauge has a zero error of $-0.03 \ mm$. While measuring the diameter of a thin wire,a student notes the main scale reading of $3 \ mm$ and the number of circular scale divisions in line with the main scale as $35$. The diameter of the wire is ....... $mm$
- A$3.38$
- B$3.32$
- C$3.73$
- D$3.67$
Explore More
Similar Questions
In a screw gauge,the fifth division of the circular scale coincides with the reference line when the ratchet is closed. There are $50$ divisions on the circular scale,and the main scale moves by $0.5 \, mm$ on a complete rotation. For a particular observation,the reading on the main scale is $5 \, mm$ and the $20^{th}$ division of the circular scale coincides with the reference line. Calculate the true reading in $mm$.
DifficultJEE MAIN 2021
View SolutionThere are two Vernier calipers,both of which have $1 \ cm$ divided into $10$ equal divisions on the main scale. The Vernier scale of one of the calipers $(C_1)$ has $10$ equal divisions that correspond to $9$ main scale divisions. The Vernier scale of the other caliper $(C_2)$ has $10$ equal divisions that correspond to $11$ main scale divisions. The readings of the two calipers are shown in the figure. The measured values (in $cm$) by calipers $C_1$ and $C_2$,respectively,are
The vernier calliper used for measurement has a positive zero error of $0.3 \ mm$. While taking measurement for the internal diameter of a vessel,it was observed that the zero of the vernier scale lies between $9.5 \ cm$ and $9.6 \ cm$ of the main scale and the $6^{th}$ division of the vernier scale coincides with a main scale division. If the least count of the vernier calliper is $0.01 \ cm$,the correct value of the diameter will be: (in $cm$)
Medium
View Solution$A$ travelling microscope is used to determine the refractive index of a glass slab. If $40$ divisions are there in $1 \; cm$ on the main scale and $50$ Vernier scale divisions are equal to $49$ main scale divisions,then the least count of the travelling microscope is $\dots \times 10^{-6} \; m$.
Which of the following is the most precise device for measuring length:
$A)$ a vernier callipers with $20$ divisions on the sliding scale
$B)$ a screw gauge of pitch $1 \; mm$ and $100$ divisions on the circular scale
$C)$ an optical instrument that can measure length to within a wavelength of light?
$A)$ a vernier callipers with $20$ divisions on the sliding scale
$B)$ a screw gauge of pitch $1 \; mm$ and $100$ divisions on the circular scale
$C)$ an optical instrument that can measure length to within a wavelength of light?
Medium
View SolutionVedclass Products
For Students
Vedclass Test Series
Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.
Start Free TrialFor Teachers
Exam Paper Generator
Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.
Try FreeFor Institutes
Online Exam Module
Live online exams with unlimited students, 360° analytics & white-label branding.
See Demo