Two rods are joined between fixed supports as | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) When the temperature increases by $\Delta T$,the rods tend to expand. Since they are fixed between rigid supports,they experience a compressive fo

Vedclass · Accepted Answer

$\frac{A_1}{A_2} = \frac{\alpha_2 Y_2}{\alpha_1 Y_1}$

Vedclass · Answer

(D) When the temperature increases by $\Delta T$,the rods tend to expand. Since they are fixed between rigid supports,they experience a compressive force $F$. For the total length to remain unchanged,the sum of the thermal expansion and the compression due to the force must be zero for each rod,or more simply,the force $F$ generated in both rods must be equal.The thermal expansion is $\Delta L_{thermal} = L \alpha \Delta T$.The compression due to force $F$ is $\Delta L_{comp} = \frac{F L}{A Y}$.For the total length to remain constant,the net change in length must be zero: $\Delta L_{thermal} - \Delta L_{comp} = 0$,which implies $F = A Y \alpha \Delta T$.Since the rods are in series,the force $F$ is the same in both rods:$F_1 = F_2$$A_1 Y_1 \alpha_1 \Delta T = A_2 Y_2 \alpha_2 \Delta T$$\frac{A_1}{A_2} = \frac{\alpha_2 Y_2}{\alpha_1 Y_1}$

Two rods are joined between fixed supports as shown in the figure. The condition for no change in the total length of the system with an increase in temperature is given by:
($\alpha_1, \alpha_2$ = linear expansion coefficients,$A_1, A_2$ = cross-sectional areas of rods,$Y_1, Y_2$ = Young's moduli)

Similar Questions

What is thermal expansion? Write only its types.

$A$ metal metre scale that is accurate up to $0.5 \ mm$ is made at a temperature of $25^{\circ} C$. The range of temperatures within which it can be used is (Coefficient of linear expansion of the metal $= 10^{-5} /{ }^{\circ} C$)

Solids expand on heating because

An aluminium sphere of $20 \; cm$ diameter is heated from $0^{\circ} C$ to $100^{\circ} C$. Its volume changes by (given that coefficient of linear expansion for aluminium $\alpha_{Al} = 23 \times 10^{-6} \; /^{\circ} C$): (in $; cm^3$)

Two brass rods $A$ and $B$ have lengths $l$ and $2l$ and radii $2r$ and $r$ respectively. If both are heated to the same temperature,the ratio of the increase in their volumes is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module

Two rods are joined between fixed supports as shown in the figure. The condition for no change in the total length of the system with an increase in temperature is given by:($\alpha_1, \alpha_2$ = linear expansion coefficients,$A_1, A_2$ = cross-sectional areas of rods,$Y_1, Y_2$ = Young's moduli)