Two short magnets $AB$ and $CD$ are in the $X-Y$ plane and are parallel to the $X$-axis. The coordinates of their centres are $(0,2)$ and $(2,0)$ respectively. The line joining the north-south poles of $CD$ is opposite to that of $AB$ and lies along the positive $X$-axis. The resultant magnetic field induction due to $AB$ and $CD$ at a point $P(2,2)$ is $100 \times 10^{-7} \ T$. When the poles of the magnet $CD$ are reversed, the resultant field induction is $50 \times 10^{-7} \ T$. The values of the magnetic moments of $AB$ and $CD$ (in $Am^2$) are:

Two identical bar magnets of magnetic moment $M$ each, are placed along $X$ and $Y$-axes, respectively at a distance $d$ from the origin (as shown in the figure). The origin lies on the perpendicular bisector of the magnet placed on the $X$-axis and on the magnetic axis of the magnet placed on the $Y$-axis. If the magnitude of the total magnetic field at the origin is $B = \alpha \left[ \frac{\mu_0}{4 \pi} \frac{M}{d^3} \right]$, then the value of the constant $\alpha$ will be (given $d >> l$, where $l$ is the length of the bar magnets and the direction of $N$ to $S$ in the magnets is opposite with respect to each other).

$A$ bar magnet of magnetic moment $10^4\,J/T$ is free to rotate in a horizontal plane. The work done in rotating the magnet slowly from a direction parallel to a horizontal magnetic field of $4 \times 10^{-5}\,T$ to a direction $60^\circ$ from the field will be... $J$.

The effect due to a uniform magnetic field on a freely suspended magnetic needle is as follows:

$A$ magnetic needle is placed in a uniform magnetic field and is aligned with the field. The needle is now rotated by an angle of $60^{\circ}$ and the work done is $W$. The torque on the magnetic needle at this position is

Verify Ampere's law for the magnetic field of a point dipole with dipole moment $\vec{M} = M\hat{k}$. Take $C$ as the closed curve running clockwise along the quarter circle of radius $a$ and center at the origin in the first quadrant of the $x-z$ plane,closed by segments along the $x$ and $z$ axes.