Under the same load,wire $A$ having length $5.0 \, m$ and cross-section $2.5 \times 10^{-5} \, m^2$ stretches uniformly by the same amount as another wire $B$ of length $6.0 \, m$ and a cross-section of $3.0 \times 10^{-5} \, m^2$ stretches. The ratio of the Young's modulus of wire $A$ to that of wire $B$ will be

$A$ steel wire of length $3.2 \, m$ $(Y_{S} = 2.0 \times 10^{11} \, N/m^{2})$ and a copper wire of length $4.4 \, m$ $(Y_{C} = 1.1 \times 10^{11} \, N/m^{2})$,both of radius $1.4 \, mm$,are connected end to end. When stretched by a load,the net elongation is found to be $1.4 \, mm$. The load applied,in Newtons,is. (Given $\pi = \frac{22}{7}$)

$A$ mild steel wire of length $1.0 \; m$ and cross-sectional area $0.50 \times 10^{-2} \; cm^{2}$ is stretched,well within its elastic limit,horizontally between two pillars. $A$ mass of $100 \; g$ is suspended from the mid-point of the wire. Calculate the depression at the midpoint.

In Young's experiment,if the length of the wire and the radius are both doubled,then the value of $Y$ will become:

Two wires $A$ and $B$ of the same cross-section are connected end to end. When the same tension is applied to both wires,the elongation in wire $B$ is twice the elongation in wire $A$. If $L_A$ and $L_B$ are the initial lengths of the wires $A$ and $B$ respectively,then (Young's modulus of material of wire $A = 2 \times 10^{11} \ Nm^{-2}$ and Young's modulus of material of wire $B = 1.1 \times 10^{11} \ Nm^{-2}$):

$A$ wire of length $2 \ m$ and cross-sectional area $10^{-2} \ cm^2$ is fixed at one end. $A$ force of $200 \ N$ is applied at the other end. The coefficient of linear expansion of the wire is $1.1 \times 10^{-5} \ ^oC^{-1}$ and the Young's modulus is $1.2 \times 10^{11} \ N/m^2$. If the temperature is increased by $10^oC$,what will be the thermal stress developed in the wire?