When $12000 \ J$ of work is done on a flywheel,its frequency of rotation increases from $10 \ Hz$ to $20 \ Hz$. The moment of inertia of the flywheel about its axis of rotation is (take $\pi^2=10$):

$A$ disc with a moment of inertia of $\frac{9.8}{\pi^2} \ kg \ m^2$ is rotating at $600 \ rpm$. If the rotational frequency changes from $600 \ rpm$ to $300 \ rpm$,the work done is .......... $J$.

$A$ thin uniform rod $AB$ of mass $m$ and length $l$ is hinged at one end $A$ to the ground level. Initially, the rod stands vertically and is allowed to fall freely to the ground in the vertical plane. The angular velocity of the rod when its $B$ end strikes the ground is $(g = \text{acceleration due to gravity})$

To maintain a rotor at a uniform angular speed of $200 \; rad \; s^{-1}$,an engine needs to transmit a torque of $180 \; N \; m$. What is the power required by the engine (in $; kW$)? (Note: uniform angular velocity in the absence of friction implies zero torque. In practice,applied torque is needed to counter frictional torque). Assume that the engine is $100 \%$ efficient.

$A$ solid sphere of mass $M$ rolls without slipping with velocity $v$ and presses a spring of spring constant $k$ as shown in the figure. The maximum compression in the spring will be:

The $M.I.$ of a body about a given axis is $1.2 \ kg \cdot m^2$ and initially the body is at rest. In order to produce a rotational kinetic energy of $1500 \ J$,an angular acceleration of $25 \ rad/s^2$ must be applied about that axis for a time duration of $....... \ s$.