$A$ uniform metal wire of length $L$,mass $M$,and density $\rho$ is under a tension $T$. If the speed of a transverse wave along the wire is $V$,then the area of cross-section of the wire is:

$A$ wire $PQ$ has length $4.8 \ m$ and mass $0.06 \ kg$. Another wire $QR$ has length $2.56 \ m$ and mass $0.2 \ kg$. Both wires have the same radii and are joined as a single wire. This wire is under a tension of $80 \ N$. $A$ wave pulse of amplitude $3.5 \ cm$ is sent along the wire $PQ$ from end $P$. The time taken by the wave to reach the other end of the single wire is (No power is dissipated during propagation). (in $s$)

$A$ block $M$ hangs vertically at the bottom end of a uniform rope of constant mass per unit length. The top end of the rope is attached to a fixed rigid support at $O$. $A$ transverse wave pulse (Pulse $1$) of wavelength $\lambda_0$ is produced at point $O$ on the rope. The pulse takes time $T_{OA}$ to reach point $A$. If the wave pulse of wavelength $\lambda_0$ is produced at point $A$ (Pulse $2$) without disturbing the position of $M$,it takes time $T_{AO}$ to reach point $O$. Which of the following options is/are correct?

$A$ mass of $20\ kg$ is hanging with the support of two strings of the same linear mass density. Now,pulses are generated in both strings at the same time near the joint at the mass. The ratio of the time taken by a pulse to travel through string $1$ to that taken by a pulse on string $2$ is:

$A$ metallic wire of $1 \ m$ length has a mass of $10 \times 10^{-3} \ kg$. If a tension of $100 \ N$ is applied to the wire,what is the speed of the transverse wave (in $ms^{-1}$)?

$A$ transverse wave propagating on a string can be described by the equation $y = 2 \sin (10x + 300t)$,where $x$ and $y$ are in meters and $t$ is in seconds. If the vibrating string has a linear mass density of $0.6 \times 10^{-3} \, g/cm$,then the tension in the string is .............. $N$.