$A$ uniform metal rod of length $L$ and mass $M$ is rotating about an axis passing through one of the ends and perpendicular to the rod with angular speed $\omega$. If the temperature increases by $t^{\circ} C$, then the change in its angular velocity is proportional to which of the following? (Coefficient of linear expansion of rod $= \alpha$)

$A$ silver rod of $100 \; cm$ at $0^{\circ} C$ is heated to $100^{\circ} C$. Its length increases by $0.19 \; cm$. The coefficient of cubical expansion of the silver rod is:

An equilateral triangle $ABC$ is formed by two copper rods $AB$ and $BC$ and one aluminium rod $AC$. The system is heated such that the temperature of each rod increases by $\Delta T$. Find the change in the angle $\angle ABC$. (Coefficient of linear expansion for copper is $\alpha_1$ and for aluminium is $\alpha_2$).

$A$ meter scale made of steel reads accurately at $25^{\circ} C$. Suppose in an experiment an accuracy of $0.06 \,mm$ in $1 \,m$ is required, the range of temperature in which the experiment can be performed with this meter scale is (Coefficient of linear expansion of steel is $11 \times 10^{-6} /{ }^{\circ} C$)

$A$ crystal has a linear expansion coefficient of $\alpha_1$ in one direction and $\alpha_2$ in all directions perpendicular to it. What will be the volume expansion coefficient of the crystal?

$A$ large steel wheel is to be fitted onto a shaft of the same material. At $27^{\circ}C$,the outer diameter of the shaft is $8.70\;cm$ and the diameter of the central hole in the wheel is $8.69\;cm$. The shaft is cooled using 'dry ice'. At what temperature (in $^{\circ}C$) of the shaft does the wheel slip on the shaft? Assume the coefficient of linear expansion of the steel to be constant over the required temperature range: $\alpha_{steel} = 1.20 \times 10^{-5}\;K^{-1}$.