$A$ disc of radius $0.4$ m and mass $1$ kg rotates about an axis passing through its centre and perpendicular to its plane. The angular acceleration is $10$ rad/s$^2$. The tangential force applied to the rim of the disc is (in $N$)

$A$ string is wrapped around the rim of a wheel of moment of inertia $0.20\, kg-m^2$ and radius $20\, cm$. The wheel is free to rotate about its axis and initially the wheel is at rest. The string is now pulled by a force of $20\, N$. The angular velocity of the wheel after $5\, s$ will be ....... $rad/s$.

$A$ wheel with a moment of inertia of $5 \times 10^{-3} \ kg \cdot m^2$ is rotating at a rate of $20 \ rev/s$. The torque required to bring it to rest in $10 \ s$ is:

$A$ rope is wound around a hollow cylinder of mass $3\, kg$ and radius $40\, cm.$ What is the angular acceleration (in $rad/s^2$) of the cylinder if the rope is pulled with a force of $30\, N$?

Obtain the relation between torque and moment of inertia.

$A$ thin uniform rod of mass $M$ and length $L$ is pivoted at a height $\frac{L}{3}$ from its lower end as shown in the figure. The rod is allowed to fall from a vertical position and lie horizontally on the table. The angular velocity of this rod when it hits the table top is . . . . . . . ($g$ = gravitational acceleration)