If heat conduction in Figure $1$ takes $12 \, sec$,how much time (in $sec$) will it take for the same amount of heat to be conducted in Figure $2$?

The only possibility of heat flow in a thermos flask is through its cork,which is $75 \ cm^2$ in area and $5 \ cm$ thick. Its thermal conductivity is $0.0075 \ cal/(cm \cdot s \cdot ^\circ C)$. The outside temperature is $40^\circ C$ and the latent heat of fusion of ice is $80 \ cal/g$. The time taken by $500 \ g$ of ice at $0^\circ C$ in the flask to melt into water at $0^\circ C$ is ....... $hr$.

If $120 \ J$ of thermal energy is incident on an area of $3 \ m^2$,the amount of heat transmitted is $12 \ J$,and the coefficient of absorption is $0.6$,then the amount of heat reflected is: (in $J$)

The dimensions of $\sigma b^4$, where $\sigma$ is Stefan's constant and $b$ is Wien's constant, are:

$A$ thin piece of thermal conductor of constant thermal conductivity,insulated on the lateral sides,connects two reservoirs which are maintained at temperatures $T_{1}$ and $T_{2}$ as shown in the figure. Assuming that the system is in a steady state,which of the following plots best represents the dependence of the rate of change of entropy on the ratio $T_{1} / T_{2}$?

Power radiated by a black body at temperature $T_1$ is $P$ and it radiates maximum energy at a wavelength $\lambda_1$. If the temperature of the black body is changed from $T_1$ to $T_2$, it radiates maximum energy at a wavelength $\frac{\lambda_1}{2}$. The power radiated at $T_2$ is (in $P$)