$A$ conducting wire of parabolic shape,initially $y=x^2$,is moving with velocity $\vec{V} = V_0 \hat{i}$ in a non-uniform magnetic field $\vec{B} = B_0 \left(1 + \left(\frac{y}{L}\right)^\beta\right) \hat{k}$,as shown in the figure. If $V_0, B_0, L$ and $\beta$ are positive constants and $\Delta \phi$ is the potential difference developed between the ends of the wire,then the correct statement$(s)$ is/are:
$(1)$ $|\Delta \phi|$ remains the same if the parabolic wire is replaced by a straight wire,$y=x$ initially,of length $\sqrt{2} L$.
$(2)$ $|\Delta \phi|$ is proportional to the length of the wire projected on the $y$-axis.
$(3)$ $|\Delta \phi| = \frac{1}{2} B_0 V_0 L$ for $\beta = 0$.
$(4)$ $|\Delta \phi| = \frac{4}{3} B_0 V_0 L$ for $\beta = 2$.

  • A
    $1, 2, 3$
  • B
    $1, 2$
  • C
    $1, 2, 4$
  • D
    $1, 3$

Explore More

Similar Questions

An aeroplane,with its wings spread $10 \, m$,is flying at a speed of $180 \, km/h$ in a horizontal direction. The total intensity of the Earth's magnetic field at that location is $2.5 \times 10^{-4} \, Wb/m^2$ and the angle of dip is $60^{\circ}$. The $EMF$ induced between the tips of the plane's wings will be ...... $mV$.

$A$ conducting rod of length $l$ is falling with a velocity $v$ perpendicular to a uniform horizontal magnetic field $B$. The potential difference between its two ends will be

$A$ metallic rod of length '$L$' is rotated with an angular speed of '$\omega$' normal to a uniform magnetic field '$B$' about an axis passing through one end of the rod,as shown in the figure. The induced emf will be:

$A$ rectangular loop $PQRS$ is being pulled with a constant speed into a uniform transverse magnetic field by a force $F$ (as shown). The $e.m.f.$ induced in side $PS$ and the potential difference between points $P$ and $S$ respectively are (Resistance of the loop $= r$)

$A$ rectangular loop with a sliding connector of length $10\, cm$ is situated in a uniform magnetic field perpendicular to the plane of the loop. The magnetic induction is $0.1\, T$ and the resistance of the connector is $1\, \Omega$. The sides $AB$ and $CD$ have resistances $2\, \Omega$ and $3\, \Omega$ respectively. Find the current in the connector during its motion with a constant velocity of $1\, m/s$.

Difficult
View Solution

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo