$A$ copper wire and a steel wire of the same diameter and length are connected end to end and a force is applied,which stretches their combined length by $1 \ cm$. The two wires will have

$A$ rod is fixed between two points at $20\,^oC$. The coefficient of linear expansion of the material of the rod is $1.1 \times 10^{-5}/\,^oC$ and Young's modulus is $1.2 \times 10^{11}\,N/m^2$. Find the stress developed in the rod if the temperature of the rod becomes $10\,^oC$.

An object of mass $15 \,kg$ is attached to the end of a metal wire of unstretched length $1.0 \,m$. The object is then whirled in a vertical circle with an angular velocity of $4 \,rad/s$ at the bottom of the circle. If the cross-sectional area of the wire is $0.05 \,cm^2$ and Young's modulus of the metal is $2 \times 10^{11} \,N/m^2$, then calculate the elongation of the wire when the mass is at the lowest point of its path. (Take $g = 10 \,m/s^2$) (in $\,mm$)

$A$ thick brass wire of length $L$ and density $\rho$ is suspended from a rigid support. Due to its own weight,$\ell$ is the increase in length. The Young's modulus $Y$ of the brass wire in terms of density is $(g = \text{acceleration due to gravity})$

$A$ wire of cross-sectional area $10^{-6} \, m^2$ is stretched such that its length increases by $0.1\%$. If the tension produced in the wire is $1000 \, N$, calculate the Young's modulus of the wire.

The speed of a transverse wave passing through a string of length $50 \; cm$ and mass $10 \; g$ is $60 \; ms^{-1}$. The area of cross-section of the wire is $2.0 \; mm^2$ and its Young's modulus is $1.2 \times 10^{11} \; Nm^{-2}$. The extension of the wire over its natural length due to its tension will be $x \times 10^{-5} \; m$. The value of $x$ is $...$