$A$ galvanometer having coil resistance $10 \ \Omega$ shows a full scale deflection for a current of $3 \ mA$. For it to measure a current of $8 \ A$,the value of the shunt should be:

There are three voltmeters of the same range but of resistances $10000\,\Omega$,$8000\,\Omega$,and $4000\,\Omega$ respectively. The best voltmeter among these is the one whose resistance is ................ $\Omega$.

$A$ galvanometer of $100\,\Omega$ resistance gives full-scale deflection when $10\,mA$ of current is passed. To convert it into a $10\,A$ range ammeter,the resistance of the shunt required will be ............... $\Omega$.

The maximum current that can be measured by a galvanometer of resistance $40 \,\Omega$ is $10 \,mA$. It is converted into a voltmeter that can read up to $50 \,V$. The resistance to be connected in series with the galvanometer is ... (in $\Omega$)

$A$ moving coil galvanometer is converted into an ammeter, reading up to $0.04 \,A$ by connecting a shunt of resistance '$3r$' across it and then into an ammeter reading up to $0.8 \,A$, when a shunt of resistance '$r$' is connected across it. What is the maximum current which can be sent through this galvanometer if no shunt is used (in $\,A$)?

Consider the following two statements $A$ and $B$ and identify the correct choice given in the answers.
$A$. Duddell's thermo-galvanometer is suitable to measure direct current only.
$B$. Thermopile can measure temperature differences of the order of $10^{-3} \, ^\circ C$.