A horizontal force F is applied at the center | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) Let $a_c$ be the acceleration of the center of mass and $f$ be the frictional force.From Newton's second law for translation: $F - f = ma_c$  $(1)

Vedclass · Accepted Answer

$B, D$

Vedclass · Answer

(D) Let $a_c$ be the acceleration of the center of mass and $f$ be the frictional force.From Newton's second law for translation: $F - f = ma_c$  $(1)$From the torque equation about the center of mass: $fR = I_c \alpha$  $(2)$For rolling without slipping: $a_c = \alpha R$,so $\alpha = \frac{a_c}{R}$.Substituting $\alpha$ in $(2)$: $fR = I_c \frac{a_c}{R} \implies f = \frac{I_c a_c}{R^2}$.Substituting $f$ in $(1)$: $F - \frac{I_c a_c}{R^2} = ma_c \implies a_c = \frac{F}{m + \frac{I_c}{R^2}}$.$(A)$ Incorrect: $a_c$ depends on $I_c$,which differs for solid $(I_c = \frac{1}{2}mR^2)$ and hollow $(I_c = mR^2)$ cylinders.$(D)$ Correct: For a thin-walled hollow cylinder,$I_c = mR^2$. Thus,$a_c = \frac{F}{m + \frac{mR^2}{R^2}} = \frac{F}{2m}$.$(C)$ Incorrect: The frictional force $f = \frac{I_c a_c}{R^2} = \frac{I_c F}{R^2(m + I_c/R^2)}$,which is not necessarily $\mu mg$.$(B)$ Correct: For rolling without slipping,$f \leq \mu mg$. Since $f = \frac{I_c a_c}{R^2}$,we have $\frac{I_c a_c}{R^2} \leq \mu mg \implies a_c \leq \frac{\mu mgR^2}{I_c}$. For a solid cylinder,$I_c = \frac{1}{2}mR^2$,so $a_c \leq \frac{\mu mgR^2}{0.5mR^2} = 2\mu g$.

Similar Questions

Suppose a body of mass $M$ and radius $R$ is allowed to roll on an inclined plane without slipping from its topmost point $A$. The acceleration of the body down the plane is given by (where $\beta = 1 + \frac{I}{MR^2}$):

$A$ ring and a solid sphere roll down the same inclined plane without slipping. They start from rest. The radii of both bodies are identical and the ratio of their kinetic energies is $\frac{7}{x}$ where $x$ is . . . . . . .

$A$ solid sphere is rolling without slipping on a horizontal rough surface and starts rising on an inclined rough surface as shown in the figure. Assume pure rolling throughout the motion. Choose the $INCORRECT$ statement.

$A$ disc rolls without slipping down an inclined plane of length $L$ and inclination $\theta$. What will be its velocity at the bottom?

$A$ ring of radius $4a$ is rigidly fixed in a vertical position on a table. $A$ small disc of mass $m$ and radius $a$ is released as shown in the figure. When the disc rolls down,without slipping,to the lowest point of the ring,then its speed will be

Vedclass Test Series

Exam Paper Generator

Online Exam Module