$A$ screw gauge gives the following reading when used to measure the diameter of a wire.
Main scale reading : $0 \ mm$
Circular scale reading : $52 \ divisions$
Given that $1 \ mm$ on the main scale corresponds to $100$ divisions of the circular scale. The diameter of the wire from the above data is: (in $cm$)

Thickness of a pencil measured by a screw gauge (least count $0.001 \ cm$) comes out to be $0.802 \ cm$. The percentage error in the measurement is (in $\%$)

In an experiment,the angles are required to be measured using an instrument where $29$ divisions of the main scale exactly coincide with $30$ divisions of the vernier scale. If the smallest division of the main scale is half a degree $(= 0.5^\circ)$,then the least count of the instrument is:

An experiment is performed to find the refractive index of glass using a travelling microscope. In this experiment,distances are measured by

$A$ tiny metallic rectangular sheet has a length and breadth of $5 \ mm$ and $2.5 \ mm$,respectively. Using a specially designed screw gauge which has a pitch of $0.75 \ mm$ and $15$ divisions on the circular scale,you are asked to find the area of the sheet. In this measurement,the maximum fractional error will be $\frac{x}{100}$ where $x$ is . . . . . .

The diameter of a cylinder is measured using a vernier callipers with no zero error. It is found that the zero of the vernier scale lies between $5.10 \ cm$ and $5.15 \ cm$ of the main scale. The vernier scale has $50$ divisions equivalent to $2.45 \ cm$. The $24^{\text{th}}$ division of the vernier scale exactly coincides with one of the main scale divisions. The diameter of the cylinder is: (in $cm$)