$A$ screw gauge of pitch $0.5\,mm$ is used to measure the diameter of a uniform wire of length $6.8\,cm$. The main scale reading is $1.5\,mm$ and the circular scale reading is $7$. The calculated curved surface area of the wire to appropriate significant figures is $......\,cm^2$. [Screw gauge has $50$ divisions on the circular scale]

In a vernier callipers,each $cm$ on the main scale is divided into $20$ equal parts. If the $10^{th}$ vernier scale division coincides with the $9^{th}$ main scale division,then the value of the vernier constant will be $\dots \; \times 10^{-2} \; mm$.

Given below are two statements:
Statement $I$: In a vernier callipers,one vernier scale division is always smaller than one main scale division.
Statement $II$: The vernier constant is given by one main scale division multiplied by the number of vernier scale division.
In the light of the above statements,choose the correct answer from the options given below.

Consider the diameter of a spherical object being measured with the help of a Vernier callipers. Suppose its $10$ Vernier Scale Divisions $(V.S.D.)$ are equal to its $9$ Main Scale Divisions $(M.S.D.)$. The least division on the $M.S.$ is $0.1 \ cm$ and the zero of $V.S.$ is at $x=0.1 \ cm$ when the jaws of the Vernier callipers are closed. If the main scale reading for the diameter is $M=5 \ cm$ and the number of the coinciding vernier division is $8$,the measured diameter after zero error correction is: (in $cm$)

If in a Vernier callipers $10 \,VSD$ coincides with $8 \,MSD$,then the least count of the Vernier calliper is ............ $m$ [given $1 \,MSD = 1 \,mm$].

The vernier scale used for measurement has a positive zero error of $0.2\, mm$. If while taking a measurement it was noted that the '$0$' on the vernier scale lies between $8.5\, cm$ and $8.6\, cm$ and the vernier coincidence is $6$,then the correct value of measurement is ............. $cm$. (Least count $= 0.01\, cm$)