$A$ steel wire is $1 \,m$ long and $1 \,mm^2$ in area of cross-section. If it takes $200 \,N$ to stretch this wire by $1 \,mm$,how much force will be required to stretch a wire of the same material as well as diameter from its normal length of $10 \,m$ to a length of $1002 \,cm$?

$A$ $5\, m$ long aluminium wire $(Y = 7 \times 10^{10}\, N/m^2)$ of diameter $3\, mm$ supports a $40\, kg$ mass. In order to have the same elongation in a copper wire $(Y = 12 \times 10^{10}\, N/m^2)$ of the same length under the same weight,the diameter should now be,in $mm$.

$A$ steel rod with a circular cross-section of diameter $1 \ cm$ and another steel rod with a square cross-section of side $1 \ cm$ have equal mass. If the two rods are subjected to the same tension, the ratio of the elongations of the two rods is

$A$ wire of length $2 \ m$ and cross-sectional area $10^{-2} \ cm^2$ is fixed at one end. $A$ force of $200 \ N$ is applied at the other end. The coefficient of linear expansion of the wire is $1.1 \times 10^{-5} \ ^oC^{-1}$ and the Young's modulus is $1.2 \times 10^{11} \ N/m^2$. If the temperature is increased by $10^oC$,what will be the thermal stress developed in the wire?

The diameter of a brass rod is $4 \ mm$ and Young's modulus of brass is $9 \times 10^{10} \ N/m^2$. The force required to stretch it by $0.1\%$ of its original length is:

The ratio of Young's modulus of three wires is $2 : 2 : 1$ and the ratio of their cross-sectional areas is $1 : 2 : 3$. If the same force is applied to each,what is the ratio of the increase in their lengths?