An area of cross-section of a rubber string is $2 \, cm^2$. Its length is doubled when stretched with a linear force of $2 \times 10^5 \, dynes$. The Young's modulus of the rubber in $dyne/cm^2$ will be:

$A$ steel ring of radius $r$ and cross-section area $A$ is fitted onto a wooden disc of radius $R$ $(R > r)$. If Young's modulus is $E$,then the force with which the steel ring is expanded is

$A$ $0.1 \,kg$ mass is suspended from a wire of negligible mass. The length of the wire is $1 \,m$ and its cross-sectional area is $4.9 \times 10^{-7} \,m^2$. If the mass is pulled a little in the vertically downward direction and released, it performs simple harmonic motion of angular frequency $140 \,rad \,s^{-1}$. If the Young's modulus of the material of the wire is $n \times 10^9 \,N \,m^{-2}$, the value of $n$ is

Three bars having lengths $l, 2l$,and $3l$ and areas of cross-section $A, 2A$,and $3A$ are joined rigidly end to end. The compound rod is subjected to a stretching force $F$. The total increase in the length of the rod is (Young's modulus of the material is $Y$ and the bars are massless).

At $40\,^oC$,a brass wire of radius $0.5\, mm$ (diameter $1\, mm$) is hung from the ceiling. $A$ small mass $M$ is hung from the free end of the wire. When the wire is cooled down from $40\,^oC$ to $20\,^oC$,it regains its original length of $0.2\, m$. The value of $M$ is close to ........$kg$. (Coefficient of linear expansion $\alpha = 10^{-5}/^oC$ and Young's modulus $Y = 10^{11}\, N/m^2$; $g = 10\, ms^{-2}$)

$A$ uniform steel rod of mass $1.8 \,kg$ and length $0.8 \,m$ is hung from a nail with the help of two steel wires,each of area of cross-section $0.01 \,mm^2$ and unstretched length $0.5 \,m$,as shown in the figure. The centre of mass of the rod lies vertically below the nail. The increase in the distance between the centre of mass of the rod and the nail due to stretching of the wires as the rod hangs is . . . . . . $mm$. (Young's modulus of steel $= 2 \times 10^{11} \,N/m^2$ and acceleration due to gravity $= 10 \,m/s^2$)