In a triode,${g_m} = 2 \times 10^{-3} \, \Omega^{-1}$,$\mu = 42$,and the resistance load $R_L = 50 \, \text{k}\Omega$. The voltage amplification obtained from this triode will be:

The value of plate current $I_P$ in the given circuit diagram will be in $mA$.

The amplification factor of a triode is $10$. When the plate potential is $200 \, V$ and the grid potential is $-4 \, V$,a plate current of $4 \, mA$ is observed. If the plate potential is changed to $160 \, V$ and the grid potential is kept at $-7 \, V$,then the plate current will be.....$mA$.

The plate resistance of two triode valves is $2 \, k\Omega$ and $4 \, k\Omega$. The amplification factor of each valve is $40$. The ratio of voltage amplification,when used with a $4 \, k\Omega$ load resistance,will be:

The plate characteristic curve of a diode in the space charge limited region is as shown in the figure. The slope of the curve at point $P$ is $5.0 \, mA/V$. The static plate resistance of the diode will be ...... $\Omega$.

Which of the following does not vary with plate or grid voltages in a vacuum triode?