In an electrical cable,there is a single wire | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The resistance of a wire is given by $R = \rho \frac{l}{A} = \rho \frac{l}{\pi r^2}$.Initially,for the single wire: $R = 5 \, \Omega$ and $r_1 = 9

Vedclass · Accepted Answer

$7.5$

Vedclass · Answer

(A) The resistance of a wire is given by $R = ho \frac{l}{A} = ho \frac{l}{\pi r^2}$.Initially,for the single wire: $R = 5 \, \Omega$ and $r_1 = 9 \, mm$.So,$5 = ho \frac{l}{\pi (9 	imes 10^{-3})^2} \implies ho l = 5 \pi (81 	imes 10^{-6}) = 405 \pi 	imes 10^{-6} \, \Omega \cdot m^2$.Finally,for the new cable consisting of $6$ wires in parallel,each with radius $r_2 = 3 \, mm$:The resistance of each individual small wire is $R' = ho \frac{l}{\pi r_2^2} = ho \frac{l}{\pi (3 	imes 10^{-3})^2} = \frac{ho l}{\pi (9 	imes 10^{-6})}$.Substituting $ho l$ from the initial condition: $R' = \frac{405 \pi 	imes 10^{-6}}{\pi (9 	imes 10^{-6})} = \frac{405}{9} = 45 \, \Omega$.Since there are $6$ such wires connected in parallel,the equivalent resistance $R_{eq}$ is given by $\frac{1}{R_{eq}} = \frac{1}{R'} + \frac{1}{R'} + \dots + \frac{1}{R'} = \frac{6}{R'}$.Therefore,$R_{eq} = \frac{R'}{6} = \frac{45}{6} = 7.5 \, \Omega$.

In an electrical cable,there is a single wire of copper with a radius of $9 \, mm$. Its resistance is $5 \, \Omega$. The cable is replaced by $6$ different insulated copper wires,each with a radius of $3 \, mm$. Now,the total resistance of the cable will be ............... $\Omega$.

Similar Questions

The cold junction of a thermocouple is at $0^{\circ} C$. The thermo e.m.f. produced in the thermocouple is given by the equation $E = 16T - 0.04T^2$, where $T$ is the temperature of the hot junction. The temperature of inversion and the neutral temperature of the thermocouple are:

$A$ cell of emf $\varepsilon$ and internal resistance $r$ is connected across a variable load resistance $R$. The graph drawn between its terminal voltage $V$ and resistance $R$ is

Two current elements $P$ and $Q$ have current-voltage characteristics as shown below. Which of the graphs given below best represents the current-voltage characteristics when $P$ and $Q$ are in series?

$A$ fuse wire with radius $1\, mm$ blows at $1.5\, A$. The radius of the fuse wire of the same material to blow at $3\, A$ will be:

Vedclass Test Series

Exam Paper Generator

Online Exam Module