In the circuit shown in the figure,if the val | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The inductive reactance is $X_L = \omega L = 100\pi 	imes \frac{1}{\pi} = 100\, \Omega$.Given $I_{rms} = 2.2\, A$ and $V_{rms} = 220\, V$,the tot

Vedclass · Accepted Answer

$\frac{1}{\sqrt{2}}$

Vedclass · Answer

(A) The inductive reactance is $X_L = \omega L = 100\pi 	imes \frac{1}{\pi} = 100\, \Omega$.Given $I_{rms} = 2.2\, A$ and $V_{rms} = 220\, V$,the total impedance $Z$ of the circuit is $Z = \frac{V_{rms}}{I_{rms}} = \frac{220}{2.2} = 100\, \Omega$.The total impedance is given by $Z = \sqrt{R^2 + (X_L - X_C)^2}$.Substituting the values: $100 = \sqrt{100^2 + (100 - X_C)^2}$.Squaring both sides: $100^2 = 100^2 + (100 - X_C)^2$,which implies $(100 - X_C)^2 = 0$,so $X_C = 100\, \Omega$.The box contains a resistor $R = 100\, \Omega$ and a capacitor $X_C = 100\, \Omega$.The impedance of the box is $Z_{box} = \sqrt{R^2 + X_C^2} = \sqrt{100^2 + 100^2} = 100\sqrt{2}\, \Omega$.The power factor of the box is $\cos \phi = \frac{R}{Z_{box}} = \frac{100}{100\sqrt{2}} = \frac{1}{\sqrt{2}}$.

In the circuit shown in the figure,if the value of $rms$ current is $2.2\, A$,the power factor of the box is:

Similar Questions

In an $ac$ circuit,the current is given by $i = 5 \sin \left( 100 t - \frac{\pi}{2} \right)$ and the $ac$ potential is $V = 200 \sin (100 t) \text{ volts}$. Then the power consumption is $....... \text{ watts}$.

In a series $LCR$ circuit,$R = 18 \ \Omega$ and the impedance $Z = 30 \ \Omega$. An $rms$ voltage of $210 \ V$ is applied across the circuit. The true power consumed in the $AC$ circuit is nearly: (in $W$)

$A$ series $LCR$ circuit is connected to an $AC$ source of voltage $V = 150 \sin(80 \pi t) \text{ V}$. If the resistance of the resistor in the circuit is $25 \ \Omega$ and the impedance in the circuit is $75 \ \Omega$, the average power dissipated per cycle in the circuit is: (in $\text{ W}$)

$(a)$ For circuits used for transporting electric power, a low power factor implies large power loss in transmission. Explain.
$(b)$ Power factor can often be improved by the use of a capacitor of appropriate capacitance in the circuit. Explain.

$A$ circuit has a resistance of $12 \; \Omega$ and an impedance of $15 \; \Omega$. The power factor of the circuit will be

Vedclass Test Series

Exam Paper Generator

Online Exam Module