In the process of electroplating a chromium coating onto an iron spoon,where should the chromium rod be connected?

$A$ current of $1 \ A$ flows in a series circuit containing an electric lamp and a conductor of $5 \ \Omega$ when connected to a $10 \ V$ battery. Calculate the resistance of the electric lamp. Now,if a resistance of $10 \ \Omega$ is connected in parallel with this series combination,what change (if any) in the current flowing through the $5 \ \Omega$ conductor and the potential difference across the lamp will take place? Give reason.

Two lamps,one rated $100 \, W$ at $220 \, V$ and the other $60 \, W$ at $220 \, V$,are connected in parallel to a $220 \, V$ supply. Find the current drawn from the supply line.

$(a)$ What is meant by saying that the potential difference between two points is $1$ volt?
$(b)$ Why does the connecting cord of an electrical heater not glow while the heating element does?
$(c)$ Electrical resistivities of some substances at $20^{\circ}C$ are given below:

Silver	$1.60 \times 10^{-8} \, \Omega m$
Copper	$1.62 \times 10^{-8} \, \Omega m$
Tungsten	$5.2 \times 10^{-8} \, \Omega m$
Iron	$10.0 \times 10^{-8} \, \Omega m$
Mercury	$94.0 \times 10^{-8} \, \Omega m$
Nichrome	$100 \times 10^{-6} \, \Omega m$

Answer the following questions in relation to them:
$(i)$ Among silver and copper, which one is a better conductor? Why?
$(ii)$ Which material would you advise to use in electrical heating devices? Why?

Define electric power. Give its $SI$ units and write its mathematical equation.

$A$ wire is $1.0 \, m$ long,$0.2 \, mm$ in diameter and has a resistance of $10 \, \Omega$. Calculate the resistivity of its material.