Length of $9 \ MSD$ of a vernier caliper are equal to $10 \ VSD$ and $1 \ MSD = 1 \ mm$. For measuring the length of a rod,the reading on the main scale is $6.4 \ cm$ and the $8^{th}$ division on the vernier scale is in line with a marking on the main scale. If there is no zero error,find the length of the rod: (in $cm$)

In a vernier calliper,when both jaws touch each other,the zero of the vernier scale shifts towards the left and its $4^{\text{th}}$ division coincides exactly with a certain division on the main scale. If $50$ vernier scale divisions $(VSD)$ are equal to $49$ main scale divisions $(MSD)$ and the zero error in the instrument is $0.04 \text{ mm}$,then how many main scale divisions are there in $1 \text{ cm}$?

In an experiment to find out the diameter of a wire using a screw gauge,the following observations were noted:
$(a)$ The screw moves $0.5\,mm$ on the main scale in one complete rotation.
$(b)$ Total divisions on the circular scale $= 50$.
$(c)$ Main scale reading is $2.5\,mm$.
$(d)$ The $45^{\text{th}}$ division of the circular scale is on the pitch line.
$(e)$ The instrument has a $0.03\,mm$ negative zero error.
Then the diameter of the wire is $...........\,mm$.

Using a screw gauge with a pitch of $0.1 \ cm$ and $50$ divisions on its circular scale,the thickness of an object is measured. How should the measurement be correctly recorded (in $cm$)?

The smallest division on the main scale of a Vernier calipers is $0.1 \text{ cm}$. Ten divisions of the Vernier scale correspond to nine divisions of the main scale. The figure below on the left shows the reading of this calipers with no gap between its two jaws. The figure on the right shows the reading with a solid sphere held between the jaws. The correct diameter of the sphere is (in $\text{ cm}$)

$A$ plano-convex lens of unknown material and unknown focal length is given. With the help of a Spherometer,we can measure the,