Suppose there is a hole in a copper plate. On heating the plate,the diameter of the hole will:

$A$ hole is drilled in a metal sheet. At $27^{\circ}C$,the diameter of the hole is $5\,cm$. When the sheet is heated to $177^{\circ}C$,the change in the diameter of the hole is $d \times 10^{-3}\,cm$. The value of $d$ will be $...........$ if the coefficient of linear expansion of the metal is $1.6 \times 10^{-5} /^{\circ}C$.

Two different wires having lengths $L_{1}$ and $L_{2}$ and respective temperature coefficients of linear expansion $\alpha_{1}$ and $\alpha_{2}$ are joined end-to-end. Then the effective temperature coefficient of linear expansion is

$A$ large steel wheel is to be fitted onto a shaft of the same material. At $27^{\circ}C$,the outer diameter of the shaft is $8.70\;cm$ and the diameter of the central hole in the wheel is $8.69\;cm$. The shaft is cooled using 'dry ice'. At what temperature (in $^{\circ}C$) of the shaft does the wheel slip on the shaft? Assume the coefficient of linear expansion of the steel to be constant over the required temperature range: $\alpha_{steel} = 1.20 \times 10^{-5}\;K^{-1}$.

On what value does the coefficient of linear expansion $\alpha_l$ depend? Write its unit.

Brass and lead rods of length $80 \ cm$ are connected in parallel at $0^{\circ}C$. If they are heated to $100^{\circ}C$,what will be the difference in length between their ends in $mm$? (Given: $\alpha_{brass} = 18 \times 10^{-6} \ ^{\circ}C^{-1}$ and $\alpha_{lead} = 28 \times 10^{-6} \ ^{\circ}C^{-1}$)