The graph between the input voltage (V_{i}) a | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) In a common emitter transistor configuration, the transfer characteristic curve shows three distinct regions:$1$. Cutoff Region: When the input vo

Vedclass · Accepted Answer

$II, III$ and $I$

Vedclass · Answer

(B) In a common emitter transistor configuration, the transfer characteristic curve shows three distinct regions:$1$. Cutoff Region: When the input voltage $(V_{i})$ is low, the transistor is in the cutoff region, and the output voltage $(V_{o})$ is high (near $V_{CC}$). This corresponds to Region $I$.$2$. Active Region: As $(V_{i})$ increases, the transistor enters the active region where the output voltage $(V_{o})$ decreases linearly with $(V_{i})$. This corresponds to Region $II$.$3$. Saturation Region: When $(V_{i})$ is high, the transistor enters the saturation region, and the output voltage $(V_{o})$ becomes very low (near $0$). This corresponds to Region $III$.Therefore, the active, saturation, and cutoff regions are represented by $II, III$ and $I$ respectively.

The graph between the input voltage $(V_{i})$ and the output voltage $(V_{o})$ of a transistor connected in common emitter configuration is shown in the figure. The active, saturation and cutoff regions of the transistor are respectively

Similar Questions

In a common emitter transistor amplifier, $AC$ current gain is $65$, the load resistance is $5400 \text{ }\Omega$ and input resistance of the transistor is $450 \text{ }\Omega$. The voltage gain is

An oscillator is nothing but an amplifier with

An $n-p-n$ transistor can be considered to be equivalent to two diodes connected back-to-back. Which of the following figures correctly represents this equivalent circuit?

In common emitter mode of a transistor, the d.c. current gain $(\beta)$ is $20$ and the emitter current $(I_E)$ is $7 \text{ mA}$. The collector current $(I_C)$ is: (in $/3 \text{ mA}$)

In a common emitter amplifier,the output resistance is $5000 \Omega$ and the input resistance is $2000 \Omega$. If the peak value of input signal voltage is $100 mV$ and $\beta=50$,then the peak value of output voltage is

Vedclass Test Series

Exam Paper Generator

Online Exam Module