The power radiated by a black body is $P$ and it radiates maximum energy around the wavelength $\lambda_0$. If the temperature of the black body is now changed so that it radiates maximum energy around wavelength $\frac{3}{4}\lambda_0$,the power radiated by it will increase by a factor of

$A$ cylinder of radius $R$ made of a material of thermal conductivity $K_1$ is surrounded by a cylindrical shell of inner radius $R$ and outer radius $2R$ made of material of thermal conductivity $K_2$. The two ends of the combined system are maintained at two different temperatures. There is no loss of heat across the cylindrical surface and the system is in steady state. The effective thermal conductivity of the system is

On a clear sunny day,an object at temperature $T$ is placed on the top of a high mountain. An identical object at the same temperature is placed at the foot of the mountain. If both the objects are exposed to sun-rays for two hours in an identical manner,the object at the top of the mountain will register a temperature

Differentiate clearly between thermal conduction,thermal convection,and thermal radiation.

$A$ heated body maintained at $T \ K$ emits thermal radiation of total energy $E$ with a maximum intensity at frequency $v$. The emissivity of the material is $0.5$. If the temperature of the body is increased and maintained at temperature $3T \ K$,then:
$(i)$ The maximum intensity of the emitted radiation will occur at frequency $v/3$.
$(ii)$ The maximum intensity of the emitted radiation will occur at frequency $3v$.
$(iii)$ The total energy of emitted radiation will become $81E$.
$(iv)$ The total energy of emitted radiation will become $27E$.

Three rods of Copper,Brass,and Steel are welded together to form a $Y$ shaped structure. The area of cross-section of each rod is $4 \ cm^2$. The end of the copper rod is maintained at $100^\circ C$,whereas the ends of the brass and steel rods are kept at $0^\circ C$. The lengths of the copper,brass,and steel rods are $46 \ cm$,$13 \ cm$,and $12 \ cm$ respectively. The rods are thermally insulated from the surroundings except at the ends. The thermal conductivities of copper,brass,and steel are $0.92$,$0.26$,and $0.12 \ CGS$ units respectively. The rate of heat flow through the copper rod is ....... $cal \ s^{-1}$.