Two blocks of mass $2 \ kg$ and $4 \ kg$ are connected by a metal wire going over a smooth pulley as shown in the figure. The radius of the wire is $4.0 \times 10^{-5} \ m$ and Young's modulus of the metal is $2.0 \times 10^{11} \ N/m^2$. The longitudinal strain developed in the wire is $\frac{1}{\alpha \pi}$. The value of $\alpha$ is [Use $g = 10 \ m/s^2$].

There are two wires of the same material and same length. The diameter of the second wire is two times the diameter of the first wire. What is the ratio of the extensions produced in the wires by applying the same load?

$A$ metal rod of Young's modulus $Y$ and coefficient of linear expansion $\alpha$ has its temperature raised by $\Delta \theta$. The linear stress required to prevent the expansion of the rod is:

$A$ student performs an experiment to determine the Young's modulus of a wire, exactly $2 \,m$ long, by Searle's method. In a particular reading, the student measures the extension in the length of the wire to be $0.8 \,mm$ with an uncertainty of $\pm 0.05 \,mm$ at a load of exactly $1.0 \,kg$. The student also measures the diameter of the wire to be $0.4 \,mm$ with an uncertainty of $\pm 0.01 \,mm$. Take $g=9.8 \,m/s^2$ (exact). The Young's modulus obtained from the reading is

At $40\,^oC$,a brass wire of radius $0.5\, mm$ (diameter $1\, mm$) is hung from the ceiling. $A$ small mass $M$ is hung from the free end of the wire. When the wire is cooled down from $40\,^oC$ to $20\,^oC$,it regains its original length of $0.2\, m$. The value of $M$ is close to ........$kg$. (Coefficient of linear expansion $\alpha = 10^{-5}/^oC$ and Young's modulus $Y = 10^{11}\, N/m^2$; $g = 10\, ms^{-2}$)

Same tension is applied to the following four wires made of same material. The elongation is longest in