Two rods having thermal conductivity in the ratio of $5:3$,having equal lengths and equal cross-sectional area,are joined face to face. If the temperature of the free end of the first rod is $100^{\circ}C$ and the free end of the second rod is $20^{\circ}C$,then the temperature of the junction is...... $^{\circ}C$.

$A$ metallic prong consists of $4$ rods made of the same material,with the same cross-sections and the same lengths as shown below. The three forked ends are kept at $100^{\circ} C$ and the handle end is at $0^{\circ} C$. The temperature of the junction is ............. $^{\circ} C$.

Two rods of same length and material transfer a given amount of heat in $12 \, s$ when they are joined end to end. But when they are joined lengthwise (parallel),they will transfer the same amount of heat under the same conditions in .......... $s$.

In a composite slab, there are two materials having coefficients of thermal conductivity $K$ and $2K$, and thicknesses $x$ and $4x$ respectively. The temperatures of the two outer surfaces of the composite slab are $T_2$ and $T_1$ $(T_2 > T_1)$. $T_2$ is on the side with conductivity $K$ and $T_1$ is on the side with conductivity $2K$. The rate of heat transfer through the slab in a steady state is $\left[ \frac{A(T_2 - T_1)K}{x} \right] \cdot f$, where $f$ is equal to:

As per the given figure,two plates $A$ and $B$ of thermal conductivity $K$ and $2K$ are joined together to form a compound plate. The thickness of the plates are $4.0 \,cm$ and $2.5 \,cm$ respectively,and the area of cross-section is $120 \,cm^{2}$ for each plate. If the equivalent thermal conductivity of the compound plate is $\left(1+\frac{5}{\alpha}\right) K$,then the value of $\alpha$ will be . . . . . .

Two rods of equal length and diameter have thermal conductivities $3$ and $4$ units respectively. If they are joined in series, the thermal conductivity of the combination would be