Two similar wires under the same load yield elongations of $0.1 \ mm$ and $0.05 \ mm$ respectively. If the area of cross-section of the first wire is $4 \ mm^2$,then the area of cross-section of the second wire is..... $mm^2$.

An aluminum rod (Young's modulus $Y = 7 \times 10^9 \, N/m^2$) has a breaking strain of $0.2\%$. The minimum cross-sectional area of the rod required to support a load of $10^4 \, N$ is:

The following four wires are made of the same material. Which of these will have the largest extension when the same tension is applied?

What is the effect of change in temperature on the Young's modulus?

$A$ wire of cross-sectional area $10^{-6} \, m^2$ is stretched such that its length increases by $0.1\%$. If the tension produced in the wire is $1000 \, N$, calculate the Young's modulus of the wire.

$A$ $500 \,g$ ball is attached to one end of an aluminum wire of area of cross-section $0.5 \,mm^2$ and an unstretched length of $1.4 \,m$. The other end of the wire is fixed to the top of a vertical pole. The ball rotates about the pole in a horizontal plane such that the angle between the wire and the horizontal is $30^{\circ}$. The increase in the length of the wire is . . . . . . $mm$. (Young's modulus of aluminum $= 0.7 \times 10^{11} \,N/m^2$ and acceleration due to gravity $= 10 \,m/s^2$)