Two wires of different materials have same le | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) $1$. Stress is defined as force per unit area $(Stress = F/A)$. Since both wires have the same diameter $d$,they have the same cross-sectional are

Vedclass · Accepted Answer

same stress but different strain

Vedclass · Answer

(D) $1$. Stress is defined as force per unit area $(Stress = F/A)$. Since both wires have the same diameter $d$,they have the same cross-sectional area $A = \pi(d/2)^2$. When a force $F$ is applied to the combined wire,the same force $F$ acts on each wire. Therefore,both wires experience the same stress.$2$. Strain is defined as the ratio of change in length to the original length $(Strain = \Delta L / L)$. The relationship between stress and strain is given by Hooke's Law: $Stress = Y 	imes Strain$,where $Y$ is the Young's modulus of the material.$3$. Since the wires are made of different materials,they have different Young's moduli $(Y_1 
eq Y_2)$.$4$. Because $Strain = Stress / Y$,and the stress is the same for both but the Young's moduli are different,the strain in the two wires must be different.$5$. Thus,the wires have the same stress but different strain.

Two wires of different materials have same length $L$ and same diameter $d$. The second wire is connected at the end of the first wire and forms one single wire of double the length. This wire is subjected to a stretching force $F$ to produce an elongation $\ell$. The two wires have:

Similar Questions

$A$ $5\, m$ long aluminium wire $(Y = 7 \times 10^{10}\, N/m^2)$ of diameter $3\, mm$ supports a $40\, kg$ mass. In order to have the same elongation in a copper wire $(Y = 12 \times 10^{10}\, N/m^2)$ of the same length under the same weight,the diameter should now be,in $mm$.

Let $L$ be the length and $d$ be the diameter of the cross-section of a wire. Wires of the same material with different $L$ and $d$ are subjected to the same tension along the length of the wire. In which of the following cases will the extension of the wire be the maximum?

The pressure to be applied to the ends of a steel cylinder to keep its length constant upon raising its temperature by $100^{\circ} C$ is (thermal expansion coefficient, $\alpha = 11 \times 10^{-6} / K$, Young's modulus $Y = 200 \text{ GPa}$)

What is Young's modulus? Explain it,and provide its unit and dimensional formula.

Vedclass Test Series

Exam Paper Generator

Online Exam Module