When a copper ball is heated,the largest percentage increase will occur in its

If a bimetallic strip is heated,it will:

$A$ steel rod at $25^{\circ} C$ is observed to be $1 \ m$ long when measured by another metal scale which is correct at $0^{\circ} C$. The exact length of the steel rod at $0^{\circ} C$ is $(\alpha_{\text{steel}} = 12 \times 10^{-6} \ ^{\circ} C^{-1}, \alpha_{\text{metal}} = 20 \times 10^{-6} \ ^{\circ} C^{-1})$. (in $m$)

Two metal plates $P$ and $Q$ of the same material are arranged as shown in the figure. If both the plates are uniformly heated through the same range of temperature,then

$A$ hole is drilled in a metal sheet. At $27^{\circ}C$,the diameter of the hole is $5\,cm$. When the sheet is heated to $177^{\circ}C$,the change in the diameter of the hole is $d \times 10^{-3}\,cm$. The value of $d$ will be $...........$ if the coefficient of linear expansion of the metal is $1.6 \times 10^{-5} /^{\circ}C$.

$A$ copper rod of $88\; cm$ and an aluminum rod of unknown length have their increase in length independent of increase in temperature. The length of the aluminum rod is....$cm$.
$(\alpha_{Cu} = 1.7 \times 10^{-5}\; K^{-1}$ and $\alpha_{Al} = 2.2 \times 10^{-5}\; K^{-1})$