Young's moduli of two wires $A$ and $B$ are in the ratio $7 : 4$. Wire $A$ is $2\, m$ long and has radius $R$. Wire $B$ is $1.5\, m$ long and has radius $2\, mm$. If the two wires stretch by the same length for a given load,then the value of $R$ is close to ......... $mm$.

If the temperature of a wire of length $2 \,m$ and area of cross-section $1 \,cm^2$ is increased from $0^{\circ}C$ to $80^{\circ}C$ and is not allowed to increase in length,then the force required for it is ............$N$ $\{Y=10^{10} \,N/m^2, \alpha=10^{-6}/^{\circ}C\}$

The dimensions of four wires of the same material are given below. The increase in length is maximum in the wire of

If $\rho$ is the density of the material of a wire and $\sigma$ is the breaking stress, what is the greatest length of the wire that can hang freely without breaking?

$A$ rod of length $L$ at room temperature and uniform area of cross section $A$ is made of a metal having a coefficient of linear expansion $\alpha /^{\circ}C$. It is observed that an external compressive force $F$,applied on each of its ends,prevents any change in the length of the rod when its temperature rises by $\Delta T \, K$. The Young's modulus $Y$ for this metal is:

$A$ steel rod has a radius of $20\,mm$ and a length of $2.0\,m$. $A$ force of $62.8\,kN$ stretches it along its length. Young's modulus of steel is $2.0 \times 10^{11}\,N/m^2$. The longitudinal strain produced in the wire is $..........\times 10^{-5}$.