A metal rod of length L and cross-sectional a | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The thermal expansion of the rod if it were free to expand is given by $\Delta L = \alpha L T$.To prevent this expansion,a compressive force $F$ m

Vedclass · Accepted Answer

$\frac{Y A \alpha T}{(1+\alpha T)}$

Vedclass · Answer

(B) The thermal expansion of the rod if it were free to expand is given by $\Delta L = \alpha L T$.To prevent this expansion,a compressive force $F$ must be applied.The stress produced is $\sigma = \frac{F}{A}$.The strain produced is $\epsilon = \frac{\Delta L}{L_{new}}$,where $L_{new} = L(1 + \alpha T)$.Using Young's modulus $Y = \frac{	ext{Stress}}{	ext{Strain}} = \frac{F/A}{\Delta L / L(1 + \alpha T)}$.Rearranging for $F$,we get $F = \frac{Y A \Delta L}{L(1 + \alpha T)}$.Substituting $\Delta L = \alpha L T$,we get $F = \frac{Y A (\alpha L T)}{L(1 + \alpha T)}$.Therefore,$F = \frac{Y A \alpha T}{1 + \alpha T}$.

$A$ metal rod of length $L$ and cross-sectional area $A$ is heated through $T^{\circ} C$. What is the force required to prevent the expansion of the rod lengthwise? $[Y=$ Young's modulus of the material of rod,$\alpha=$ coefficient of linear expansion $]$

Similar Questions

Two copper wires $A$ and $B$ of lengths in the ratio $1: 2$ and diameters in the ratio $3: 2$ are stretched by forces in the ratio $3: 1$. The ratio of the elastic potential energies stored per unit volume in the wires $A$ and $B$ is

Which one is more elastic,steel or plastic? Why?

$A$ fixed volume of iron is drawn into a wire of length $l$. The extension produced in this wire by a constant force $F$ is proportional to

$A$ metallic ring of radius $r$ and cross-sectional area $A$ is fitted into a wooden circular disc of radius $R$ $(R > r)$. If the Young's modulus of the material of the ring is $Y$, the force with which the metal ring expands is

There are two wires of the same material and same length. If the diameter of the second wire is two times the diameter of the first wire,then the ratio of the extension produced in the wires by applying the same load will be:

Vedclass Test Series

Exam Paper Generator

Online Exam Module