The density of a metal at normal pressure P i | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The bulk modulus $K$ is defined as $K = -V \frac{dp}{dV}$.For a small change in pressure $p$,we have $K = -V \frac{p}{\Delta V}$,which gives $\Del

Vedclass · Accepted Answer

$\frac{1}{1-\frac{P}{K}}$

Vedclass · Answer

(D) The bulk modulus $K$ is defined as $K = -V \frac{dp}{dV}$.For a small change in pressure $p$,we have $K = -V \frac{p}{\Delta V}$,which gives $\Delta V = -\frac{pV}{K}$.The new volume $V^{\prime}$ is $V^{\prime} = V + \Delta V = V - \frac{pV}{K} = V(1 - \frac{p}{K})$.Since density $\varrho = \frac{m}{V}$,the new density is $\varrho^{\prime} = \frac{m}{V^{\prime}} = \frac{m}{V(1 - \frac{p}{K})}$.Substituting $\varrho = \frac{m}{V}$,we get $\varrho^{\prime} = \frac{\varrho}{1 - \frac{p}{K}}$.Therefore,the ratio $\frac{\varrho^{\prime}}{\varrho} = \frac{1}{1 - \frac{p}{K}}$.

The density of a metal at normal pressure $P$ is $\varrho$. When it is subjected to an excess pressure $p$,the density becomes $\varrho^{\prime}$. If $K$ is the bulk modulus of the metal,then the ratio $\frac{\varrho^{\prime}}{\varrho}$ is

Similar Questions

The adiabatic bulk modulus of a gas at a pressure $P$ is (where $\gamma$ is the ratio of specific heat capacities of the gas).

If a brass sphere of radius $36 \ cm$ is submerged in a lake at a depth where the pressure is $10^7 \ Pa$, then the change in the radius of the sphere is $($Bulk modulus of brass $= 60 \ GPa)$.

When a sphere is taken to the bottom of a sea of depth $1 \ km$,it contracts in volume by $0.01 \%$. The bulk modulus of the material of the sphere is (Acceleration due to gravity $= 10 \ m \ s^{-2}$,density of sea water $= 10^3 \ kg \ m^{-3}$)

What is the density of water at a depth where pressure is $80.0 \; atm$, given that its density at the surface is $1.03 \times 10^{3} \; kg \; m^{-3}$? (Take bulk modulus of water $B = 2.2 \times 10^{9} \; Pa$ or compressibility $45.8 \times 10^{-11} \; Pa^{-1}$)

The increase in pressure required to decrease the $200 \, L$ volume of a liquid by $0.008 \, \%$ in $kPa$ is (Bulk modulus of the liquid $= 2100 \, MPa$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module