The lengths of four wires $A, B, C$ and $D$ made of the same material are $1 \,m, 2 \,m, 3 \,m$ and $4 \,m$ respectively. The radii of the wires $A, B, C$ and $D$ are $0.2 \,mm, 0.4 \,mm, 0.6 \,mm$ and $0.8 \,mm$ respectively. For the same applied tension, the elongation is more in which wire?

In the given figure,if the dimensions of the two wires are same but materials are different,then Young's modulus is ........

The length of a metal wire is found to be $L_1$ and $L_2$ when the tensions $T_1$ and $T_2$ are applied to it respectively. The natural length of the wire is

$A$ fixed volume of iron is drawn into a wire of length $l$. The extension produced in this wire by a constant force $F$ is proportional to

$A$ steel wire of length $20 \text{ cm}$ and area of cross-section $1 \text{ mm}^2$ is tied rigidly at both the ends. When the temperature of the wire is changed from $40^{\circ} \text{C}$ to $20^{\circ} \text{C}$, find the change in its tension. Given, the coefficient of linear expansion for steel is $\alpha = 1.1 \times 10^{-5} {}^{\circ} \text{C}^{-1}$ and Young's modulus of steel is $Y = 2.0 \times 10^{11} \text{ N/m}^2$. (in $\text{ N}$)

The ratio of the lengths of two wires of the same material is $1:2$ and the ratio of their radii is $1:\sqrt{2}$. If they are stretched by the same force,what is the ratio of the increase in their lengths?